<delect id="b5zx3"><object id="b5zx3"></object></delect>
    <em id="b5zx3"><ol id="b5zx3"></ol></em>

      <em id="b5zx3"></em>

        <sup id="b5zx3"><meter id="b5zx3"></meter></sup>

          <em id="b5zx3"></em>
            <sup id="b5zx3"><menu id="b5zx3"><form id="b5zx3"></form></menu></sup>

              產品詳情
              • 產品名稱:松下印刷機SP22P

              • 產品型號:SP22P
              • 產品廠商:松下
              • 產品文檔:
              你添加了1件商品 查看購物車
              簡單介紹:
              松下印刷機SP22P:設備來源于歐美,歐美設備因為其使用時間少、維護保養好兩大特點,而使得設備能夠再利用壽命更長、精度更高、穩定性更好。 服務:40名左右售后服務工程師,24小時為客戶服務。備件倉庫存放大量可替換零件。電子維修部可以幫助客戶維修到板卡級。以我們客戶的經驗來看,貼片機的年維修成本普遍低于3000元(包括易損件)
              詳情介紹:

              Equipment       Model                   SPP-V XL                   SP22P-M  
              General         Length (inches)          71                        55.1
                                 Width (inches)            70                        63  
                                 Height (inches)           59                        63  
                                 Automation                Fully automatic           Fully automatic  

              Board Handling  Maximum size (inches)    18x20                     10x13  
                              Minimum size (inches)            2x2                       2x2  
                              Maximum thickness (")           0.16                      0.12  
                              Minimum thickness (")            0.02                      0.015  
                              Maximum warpage (")            0.047                     0.039  
                              Underside component clearance (inches)   1.18      0.94  
                              Board held by            Edge clamp, vacuum, pin   Edge clamp  
                              Board support            Tooling pins, vacuum plate Tooling pins, vacuum plate, other  
                              Conveyor                          Standard                  Standard  
                              Board Movement           R to L, L to R            L to R   
                              Dual-lane board handling?          No                    No  

              Print Head      Print area (inches)             19x29                 14.17x13.7  
                              Maximum print stroke(")         29                    13  
                              Mdthod of registration           Vision                Vision  
                              Optical alignment?                 Yes                   Yes  
                              Alignment accuracy (microns)  25                   N/A  
                              Alignment repeatability (microns) 8                N/A  
                              Print Modes             Print/print, print/flood,  Print/print, print/flood,                                                                     
                              Print pressure (pounds)   0 to 43                  0.011 to 0.055  
                              Snap off (print gap) (inches) -0.04 to 0.4         N/A  
                              Is snap-off programmable?      Yes                 No  
                              Cycle time (seconds)      Single lane: 16          Single lane: 9  

              Stencil         Frame size (inches)       39.4x33.5                21.65x25.6  
                              PCB stencil seperation    0 to 0.39                0.024
                              Stencil cleaning           Dry, wet, vacuum        Dry, wet, vacuum  
                              Programmable?              Yes                     Yes  
                              Stencil Wiper              Standard                Standard  

              Squeegee        Squeegees             Metal, polyurethane, other   Metal, polyurethane  
                              Squeegee pressure          0 to 43                 0.011 to 0.055  
                              Where measured?          At squeegee head          Air cylinder  
                              Horizontal or central pivot?    Both               Horizontal  


              Vision system   Type                              On the move , look down      Fixed, on the move, look up, look down  
                              Field of vision (inches)               0.120                               0.2  
                              SMEMA fiducial standard compatible?    Yes                         Yes  
                              Align calibration                        Full automatic                    Semi-automatic  
                              Post-print inspection available?              2-D                           2-D  

              Program         Up and down line protocol         SMEMA                SMEMA   
                                  Number of programs stored         200                    99 
               
               松下印刷機SP22P
                1、二手SMT/AI設備買賣業務

                      2、銷售自主研發和制造的AOI設備

                      3、SMT/AT設備零件買賣

                      4、SMT/AI設備服務銷售

                      5、部分SMT新設備代理銷售

              番号作品封面女女互舔视频